How do you program garage buttons on my Audi?

There are 3 buttons on the top of my visor.How do you program garage buttons on my Audi?Really people, if you don't know how to help someone, just don't answer. What's the point?



There are two methods depending on the type of security on your garage door opener.



Here is a link to Homelink's site. This page will allow you to enter your model car and get specific instructions.



http://www.homelink.com/training/train.t鈥?/a>How do you program garage buttons on my Audi?I don't, you do.

Read the owners manual.How do you program garage buttons on my Audi?Hi....It kind of depends on the year Audi you have, but basically you push and hold the outer buttons on the homelink (buttons I and III) until the red homelink LED begins to blink. Press and hold the button you want to program (I, II, or III) until the LED Blinks slowly. No go out of the car, and press the garage remote right in front of the right headlight. Watch to see the hazard lights blink three times. You should be done (unless your garage door has a rolling code). You can program another remote by pressing another homelink button (I, II, or III), and repeat just the last part. See the link below for more info! I would also suggest you do this all outside your garage, and make sure there is nothing in the way of you garage door, because It will be activated multiple times while doing all this! Good luck!How do you program garage buttons on my Audi?
Read the manual